KARBON TEKNOLOJİ VE MAKİNA SANAYİ LİMİTED ŞİRKETİ

MALİYE CAD. ÇELEBİ SOK. NO:1 K:5 KARAKÖY BEYOĞLU - BEYOĞLU / İSTANBUL / TÜRKİYE

En son güncellenme Tarihi: 8.05.2013 14:25:00
Değerlendirme :

Bilgilerinin hatalı veya eksik olduğunu düşünüyorsanız güncelleyebilmemiz için lütfen bize bildiriniz.

İşletme değerlendirmeleri ve yorumlar

Şikayet Yaz İlk yorum yapan siz olun

Firma Bilgileri

  • Ünvanı : KARBON TEKNOLOJİ VE MAKİNA SANAYİ LİMİTED ŞİRKETİ
  • Kuruluş Tarihi : 10 Şubat 2012 Cuma
  • Sermaye : 50.000,00 TL
  • Ticaret Odası : İSTANBUL TİCARET ODASI
  • Sicil Numarası : 807737
  • NACE Kodu : 261190
Her nevi elektronik malzemelerinin imalatını tamiri alım satımı ithalat ve ihracatını yapmak. ENDÜSTRİYEL ENDÜSTRİYEL ROBOTLAR Lazer Cnc Yazılım HMI Port Automation Embedded systems Factory automation Chain store automation OTOMOTİV ECU Diagnose systems Angular Accelaration Safety Sensors MEDİKAL Hemogram (Blood Analyzers) Air Ventilators Blood Pressure Transducers Beauty and Cosmetics Hair removal devices Lipo Laser TENS, EMS Devices Instant Heater/Cooler EKG, Holter Thesaurus George Devol applied for the first robotics patents in 1954 (granted in 1961). The first company to produce a robot was Unimation, founded by Devol and Joseph F. Engelberger in 1956, and was based on Devol’s original patents. Unimation robots were also called programmable transfer machines since their main use at first was to transfer objects from one point to another, less than a dozen feet or so apart. They used hydraulic actuators and were programmed in joint coordinates, i.e. the angles of the various joints were stored during a teaching phase and replayed in operation. They were accurate to within 1/10,000 of an inch[citation needed] (note: although accuracy is not an appropriate measure for robots, usually evaluated in terms of repeatability – see later). Medical Air Ventilator Medical ventilator (or simply ventilator in context) is a machine designed to mechanically move breatheable air into and out of the lungs, to provide the mechanism of breathing for a patient who is physically unable to breathe, or breathing insufficiently. While modern ventilators are computerized machines, patients can be ventilated with a bag valve mask, a simple hand-operated machine. After Hurricane Katrina, dedicated staff “bagged” patients in New Orleans hospitals for days with simple bag valve units attached to endotracheal tubes, a “ventilator” system which can be used with no definite time limit. ECU An engine control unit (ECU), most commonly called the powertrain control module (PCM), is a type of electronic control unit that controls a series of actuators on an internal combustion engine to ensure the optimum running. It does this by reading values from a multitude of sensors within the engine bay, interpreting the data using multidimensional performance maps (called Look-up tables), and adjusting the engine actuators accordingly. Before ECUs, air/fuel mixture, ignition timing, and idle speed were mechanically set and dynamically controlled by mechanical and pneumatic means. HMI In complex systems, the human-machine interface is typically computerized. The term Human-computer interface refers to this kind of systems. The engineering of the human-machine interfaces is by considering ergonomics (Human Factors). The corresponding disciplines are Human Factors Engineering (HFE) and Usability Engineering (UE), which is part of Systems Engineering. Tools used for incorporating the human factors in the interface design are developed based on knowledge of computer science, such as computer graphics, operating systems, programming languages. Primary methods used in the interface design include prototyping and simulation.

HATALI İŞLETME BİLGİSİ BİLDİRİMİ.KAPAT
İşletmelere mesaj göndermek için "Mesaj Gönder" bölümünü kullanınız.
KARBON TEKNOLOJİ VE MAKİNA SANAYİ LİMİTED ŞİRKETİ
İPTAL